We need your measurements to design a custom fit box for your vehicle.

To design a box for your vehicle, we will need a few easy & quick measurements from you.

The Width, Height, & Depth (in inches)

* IMPORTANT, Please, no angles measured, just straight lines.

A common mistake is the back seat slope, we need the trunk floor to the highest point usable for the subwoofer box. Straight Up is how this is measured. (not from the bottom of the seat back)

The Depth measurement is from the same location of the height bottom.

Again, not from the bottom of the seat back, just the point straight down from the highest point usable for the subwoofer box.

The space to be measured, is for a complete squared off, rectangle. The Depth is measured with both the top and bottom of the box in mind. You'll want to make sure the box will fit in the trunk.

Only measure the Height to the lowest part of the inside of a trunk (car), or a SUV, normally should be the top of the backrest of the seat, straight to the floor. (or under a shade)

Please email or call with any questions - 414-236-4800

 

Custom Fit Subwoofer Box Plans, to Build Yourself

All easy to build, custom fit subwoofer enclosure plans include:

Instruction Sheet, Supply & Cut Lists

Click here for box designs now listed on ebay

Each set of plans is designed for the Novice Do-it-yourself'er

Check out the new Customer Gallery

Milwaukee, WI &

Las Vegas, NV

Milwaukee Phone: (414) 236-4800

Las Vegas Phone: (702) 628-7948

Email: hazelton@hazeltonsound.com